Wednesday, August 28, 2013

...

Well, it looks like my system is not up to doing much with hair in the Cycles renderer. When I try to render my latest eyebrow attempts, the face disappears. A very disappointing turn of events, that. I was really looking forward to fooling around with the hair editing tools and getting some amateurish but at least interesting results.

I may be able to get something with the Blender Internal engine, but the whole lighting and material system is so much more fiddly and the results so unrealistic, it's really putting me off the whole exercise.

Tuesday, August 27, 2013

The Eyebrows Look Painted On

And I'm not going to show them to you.

I'll post again, when I get something better.

Saturday, August 24, 2013

Eyelashes and Massive Frustration


So, four days of struggle to get some kind of OK-I-guess lashes. Some lessons learned:

When using a multi-resolution modifier and adding a particle system (i.e. hair) on top, the level of the preview has to be the same as the render level. The particle directions are based on the modified geometry underneath, and if the level where you do the particle editing (the preview) doesn't match the final render level, the particles will go shooting off in unexpected directions. Until I realized this, I thought there was some bug with hair rendering that only happened in the final render (and not when the 3D view was set to render the preview). I spent a couple of days messing around trying to figure this out.

You've also got to turn on the "use modifier stack" on the emission control panel or particles (hairs) will come shooting out of weird places and directions.

In order to paint vertexes in the weight painting mode, you need to select faces (or maybe turn the face selection mask off?). Otherwise, it just won't do anything, which is not particularly useful.

The "physics" panel on the particle system settings is not about the physics of the hair, but of the particles that direct the hair growth. So you want the physics on and Newtonian. Then you can set the emission parameters to shoot the growth lines more or less straight out of the skin surface, or whatever else you want. In this case I actually had a small "normal" component and a small negative-Y "object" component, to make the lashes point out of the skin and forward. After that it was all fooling around with the particle editing tools (see next point).


Combing lashes is a pain in the ass.

Finally, and this was an even bigger pain in the ass, I was (am?) reaching the limitations of my system and/or Blender as things started getting very crash-y. Rendering would crash a lot. Switching back to the 3D view would crash. Saving might crash. Eventually, I found that if I dropped down the level of the multi-resolution modifier, things improved. So it seems like it is basically caused by having too much geometry to render. However, doing that meant (because of the first point above) that I would have to start over, since trying to change the multi-resolution modifier with a particle system attached would mess up the particle paths or (more usually) crash.

So, Blender is amazing, but not completely amazing (at least on a run-of-the-mill iMac). And now I'm worried how much I'll be able to do with eyebrows and hair. Still, onward.

Tuesday, August 20, 2013

I Suspect This Is Unnecessary


First a couple of closeups of the eyes, showing some (but not all!) of the detail which will not appear in the final picture.

Third from the top: I've moved the lights around a bit to change the shape of the reflection in the eye.

And finally: a hastily done wool-ish scarf, which, as usual, took more work than it looks like.

Tomorrow, eyebrows... maybe.

Monday, August 19, 2013

Reflections


A huge effort to get a couple of glints of light in an eye. Bump textures, noise textures, subsurface scattering, refraction... more complicated than the skin, even. At at the end of it all, I'm thinking I might move the light sources to reduce some of those reflections I worked so hard to get.

Anyway, the eyes are done for now. Next, either clothes (probably just a scarf to cover that horrible neck), or hair.

Sunday, August 18, 2013

Eyes, A Beginning



You would not believe the amount of time it took to just make her eyes brown. Well, making her eyes simply brown wouldn't have taken much time, but I had to lay the groundwork for the rest of the exercise in eye rendering, and that includes remodeling the eye a fair bit. So I only ended up getting a simple diffuse shader with a texture map of a basic iris.

Also today, I added a rim effect (a bit hard to explain, but based on the one in the tutorial) which I'm convinced is completely invisible.

Still, looking forward to adding a bit of life to those eyes.

Saturday, August 17, 2013

Tiny Tiny Changes


It's really a bit crazy how much work it takes to get from one picture to the next in that series, especially since I would challenge most people to be able to tell the difference between any of them (except for the obvious background color change). From top to bottom:

First, the image from yesterday. This is an image used as a diffuse texture map, mixed with a pure white glossy effect to represent oil on the skin. That's it.

Second, I've added in sub-surface scattering (representing light that travels into and gets scattered from inside the skin). This is a single sub-surface scattering shader mixed with the diffuse color on the previous image and that result, in turn, mixed with the gloss. I think you might be able to see the effect if you look closely at her right nostril. Seriously, I'm not kidding. I doubt I'm going to go for a full-on three scatterer model for this exercise, because it's a whole lot of work for a minuscule effect. I'm fairly satisfied with what I got out of one shader, and I'll save fooling with the more complex and realistic treatment for some other time, maybe when I'm using stronger back lighting. (Honestly, I want to get on to the eyes and hair.)

Third, tweaking parameters on the gloss and sub-surface, adding a bump map to break up the gloss and make it look a little less plastic, though I'm not sure how well that worked, and also a mask to represent how skin tends to be more oily or sweaty on the forehead, nose and under the eyes compared to the cheeks.

Finally, adding a texture map (a reddened version of the diffuse texture) to control the sub-surface scatterer and restore a bit of the color variation (notice how the mole on her cheek is a bit clearer again in the last version compared to the middle two).

So, I think I'll call it a day with the skin shader and move on to the eyes for the next stage.

Friday, August 16, 2013

Ah-ha


Checked the helpful Introduction to Cycles video and it cleared up a lot. Turns out materials make plenty of sense, I was just being confused by the way the older Blender internal renderer has a completely different way of setting up texture maps, and the tutorial I was following was using that for some things and Cycles for others. I've switched to focus on using the Cycles renderer for a more realistic look (and because it seems more sensible to me--I rather like the node editor, actually). The problems with the underlying geometry are getting more and more horrid looking as the materials and lighting improve, but I have to leave that for my next attempt, and finish this one first.

Thursday, August 15, 2013

The Flesh Begins


And it looks bad. It will probably continue to look bad. But seriously, what can I expect? Most of this has become an exercise in finding out how many ways things can be messed up only to discover so late there is nothing to do but ignore it and slog on.

Skin texturing is a bit of a mess.

Finding it very hard to wrap my head around materials and textures. I know how I think they should work, but the Blender UI does not behave that way, or so it seems.

Anyway, I got a recognizable pinkish blob to use as a basis for further fooling around. Someday I may even give her hair.

Saturday, August 10, 2013

That time of the exercise


It's that time of the exercise when you just stop fooling around at one stage and continue, even though you're not satisfied, because you'd never be satisfied.

After all afternoon fiddling and deleting disastrous false starts, I finally decided to not work on the shapes any more. If I tried to get something I really liked, I'd be here forever. Time to go on to the next step.

Friday, August 09, 2013

Rinse and Repeat


I didn't even know there was such a thing as "retopologizing" (and my dictionary assures me there is not), but I know now that it is this thing that takes a long time to get you something that then needs to be fiddled with some more to get it back looking like the first thing you made.

Anyway, progress, I think.

Friday, August 02, 2013

May Someday be Useful

I'm sort of dipping into a bunch of different tutorials to see what I can learn. This is the same head model from last night, pushed along a little further. It's mostly based on Creating a Realistic Head in Blender. I don't expect to go as far with it as the tutorial does (but you never know). I just wanted to pick up the techniques and try out the main ones.

Blender's interface takes a little while to get used to, but really not as long as I thought it would. The other nice thing is it turns out that anatomy and proportions I studied for drawing do seem to transfer over to 3D work pretty easily.

Thursday, August 01, 2013

Blender, Day Three

So, some months after downloading it, I'm finally trying to use Blender. It's actually a pretty amazing piece of software. I really shouldn't expect to just be able to work up something like that in a matter of hours after three days fooling around with it. But it doesn't make me a madly talented 3D sculptor with no effort at all, which was, of course, what I was secretly hoping for.